Mechanical Engineering

Department Activities

a) Symposium / Seminar / Workshop / FDP / Conference Conducted

2015-16

  • Conducted a one day workshop and Training on Internal Combustion Engine sponsored by SAE on 03.03.2015.
  • Conducted a seminar on Applications of FEA in Design and Manufacturing on 10.03.2015
  • Organised a seminar and Mr.Moses selvakumar delivered a speech on “To Know about Yourself – Character Building – An Industrial Perspective” on 11.07.2015
  • Organised a symposium and Mr. Mudasaar Ali delivered a special lecture on the symposium “Krenovate 15” on 23.09.2015
  • Organised a workshop and Mr. T.Srinivasan presented on the topic “Product Devlopment and analysis using Solid Workds, in the Workshop on 01.10.2015.

2014-15

  • Conducted a workshop and Mr.K.Sathiyamurthy, delivered a speech in the workshop of Industrial automation using robots and PLC on 04.09.2014
  • Organised a symposium and Dr. C. Velayutham, delivered a guest lecture in the Symposium, “ Yantra 14” on 23.09.2014
  • Conducted a workshop and Mr.P.Xavier Jaganathan presented a speech in the workshop on “Internal Combustion Engines” on 03.03.2015
  • Organised a seminar and Dr. C. Chandrasekar,gave a lecture on “Basics of finite element analysis and applications” on 10.03.2015.

2013-14

  • Organised a Seminar and Mr. Mr.Sundar, delivered a speech on “ Industrial PLC automation” on 05.09.2013
  • Organised a Symposium and Dr.G.Rengaswamy, delivered a special lecture in the Symposium, “MECARDIA 2K13” on 24.09.2013
  • Conducted a workshop and Mr.V.Balaji presented a speech in the workshop on “Product Analysis using Solid works” on 14.02.2014
  • Conducted a seminar and Mr.Prasad, gave a lecture on “International Education Guidance to students for Higher Studies” in the seminar on 19.03.2015.

2012-13

  • Organised a workshop on Robot modeling and Manufacturing, Mr.R.Prabhakaran & Mr.Nivin gave a speech on Robotics in the workshop on 13.08.2012
  • Conducted a workshop on the Fuel Conservation on 24.08.2012 and Mr.Raman delivered a speech on
  • Mr. Ravi Chandran presented a special lecture in the workshop on “Advanced Welding Techniques” on 10.09.2012.
  • Mr. Chidambaram, delivered a special lecture in the Symposium, “MECARDIA 2K12” on 25.09.2012.
  • Dr.V.Ganesan, presented an inaugural address in the AICTE sponsored FDP on Advances in IC Engines on the topic “From Horse Power to HorsePower” on 06.05.2013.
  • Dr. N. Nallusamy, presented an special lecture in the AICTE sponsored FDP on Advances in IC Engines on the topic “Fuel Injection” on 07.05.2013.
  • Dr.Pramod S Mehta, presented an special lecture in the AICTE sponsored FDP on Advances in IC Engines on the topic “Theory of Engines” on 07.05.2013.
  • Dr.Mohamed Ghouse, presented an special lecture in the AICTE sponsored FDP on Advances in IC Engines on the topic “Renewable Energy” on 07.05.2013.
  • Dr.G.Nagarajan, presented an special lecture in the AICTE sponsored FDP on Advances in IC Engines on the topic “Electronics in Engine Management” on 08.05.2013.

2011-12

  • Conducted a conference “My Idea – an Technological Perspective on 08.02.2012, Funding agency : TBI – VIT.
  • Conducted a workshop on Analysis by Solid Works on 24.02.2011, Mr.V.Balaji was a resource person
  • Organised a seminar on Software Applications in Mechanical Engineering on 10.02.2012 Mr.V.Balaji was a Resource person.
  • Organised a seminar on 17.02.2012 on a topic “Role of Mechanical Engineers in Navy” and Mr.Shankar was a resource person
  • Organised a Seminar on a topic “Solar Refrigeration” on 15.03.2012. Dr.A.Mani was a resource person

b) Faculty Development - FDPs / Workshops / Conferences Attended

2015-2016

  • A. Shadrach Jeyasekaran attended FDP on Research Training and Grant writing at Dept. Of Management studies, St. Peter’s college of Engineering and Technology on 2/4/2016.
  • G. Ramya Devi attended FDP on Research Training and Grant writing at Dept. Of Management studies, St. Peter’s college of Engineering and Technology on 2/4/2016.
  • A.P. Arun Pravin attended FDP on Research Training and Grant writing at Dept. Of Management studies, St. Peter’s college of Engineering and Technology on 2/4/2016.
  • S.Abilash attended FDP on Research Training and Grant writing at Dept. Of Management studies, St. Peter’s college of Engineering and Technology on 2/4/2016.
  • R.Nishanth attended FDP on Research Training and Grant writing at Dept. Of Management studies, St. Peter’s college of Engineering and Technology on 2/4/2016.
  • S.Rangarajan attended FDP on Research Training and Grant writing at Dept. Of Management studies, St. Peter’s college of Engineering and Technology on 2/4/2016.
  • All Mechanical faculty members attended a seminar on Intellectual property rights delivered by Dr. A. Kandababu on October 2015.
  • Mrs. M. Avadiammal attended FDP on Computer Aided Design at Veltech Multitech Engineering College organised by Anna University on 10/6/2015 to 18/6/2015.

2014-2015

  • Dr. G. Gopalarama subramaniyan attended Training on MASTERCAM X 8 at SPCET on 6/4/2015 to 8/4/2015.
  • A. Shadrach Jeyasekaran, G. Ramya Devi, P.Suresh, D. Sathiyamoorthy, A.P.Arun Pravin, S. Jebamani, R. Nishanth attended Training on MASTERCAM X 8 at SPCET on 6/4/2015 to 8/4/2015.
  • G. Ramyadevi, A. Shadrach Jeyasekaran, P. Suresh, S. Jebamani, R. Nishanth, M.Kamal, S. Abilash, A.P. Arun Pravin attended Training on CNC Programming X 8 at SPCET on 6/5/2015 to 7/5/2015.
  • M.V.Manivannan attended FDP on Design of Experiments at Saveetha School of Engineering on 21/4/2015.
  • P.Suresh attended a short term course on Responsive and sustainable productdevelopment strategies at NIT Trichy on 27/3/2015 to 28/3/2015.
  • A. Shadrach Jeyasekaran attended Conference on Training on Advances in Materials and Manufacturing Engineering at Sai Institute of technology on 19/12/2014 to 20/12/2014.
  • G. Ramya Devi attended Conference on Training on Advances in Materials and Manufacturing Engineering at Sai Institute of technology on 19/12/2014 to 20/12/2014.
  • P. Suresh Jeyasekaran attended Conference on Training on Advances in Materials and Manufacturing Engineering at Sai Institute of technology on 19/12/2014 to 20/12/2014.
  • Dr. K. Purushothaman attended FDP on Training on Entrepreneurship Development at Technology Business Incubator on 8/12/2014 to 20/12/2014.
  • M.V.Manivannan attended FDP on Pump Design and Applications at Saveetha School of Engineering on 18/12/2014 to 19/12/2014.
  • R. Nishanth attended FDP on Training on Entrepreneurship Development at Technology Business Incubator on 8/12/2014 to 20/12/2014.
  • R. Nishanth attended FDP on Training on Entrepreneurship Development at Technology Business Incubator on 20/4/2015 to 2/5/2015.
  • A. Shadrach Jeyasekaran attended FDP on Workshop on Green Composites at Sai Institute of technology on 27/8/2014.
  • G. Ramya devi attended FDP on Workshop on Green Composites at Sai Institute of technology on 27/8/2014.
  • A. Muthuram attended FDP on Workshop on Green Composites at Sai Institute of technology on 27/8/2014.
  • M.V.Manivannan attended FDP on Workshop on Green Composites at Sai Institute of technology on 27/8/2014.

2013-2014

  • Mr. A.P. Arun Pravin attended Conference on Emerging Trends in Thermal, Industrial and Manufacturing Engineering at Karpagam college of Engineering on 28/3/2014.
  • Orientation program has been conducted for the new faculties Mr. D. Sathiyamoorthy, Mrs. M. Avadiammal, Mr. R. Nishanth, Mr. S. Rangarajan and Mr. R. Senthil Nehru on 10/2/2014.
  • Mr. P. Suresh attended workshop on Agile Manufacturing at NIT Trichy from 28/3/14 to 29/3/14.
  • Mr. A. Shadrach Jeyasekaran attended workshop on Recent trends in Natural Composites and its hybrids for structural Applications at Sri Venkateshwara College of Engineering from 25/9/2013 to 26/9/2013.
  • Mr. M.V.Manivannan attended workshop on Recent trends in Natural Composites and its hybrids for structural Applications at Sri Venkateshwara College of Engineering from 25/9/2013 to 26/9/2013.

2012-2013

  • Dr. K. Purushothaman attended Conference on Computational Intelligence and Advance Material Research at Anna University from 5-04-2013 to 6-04-2013.
  • Mr. A. Shadrach Jeyasekaran attended FDP on Advances in IC Engines at St. Peter’s college of Engineering and Technology from 6/5/2013 to 18/5/2013.
  • Mrs. G. Ramya Devi attended FDP on Advances in IC Engines at St. Peter’s college of Engineering and Technology from 6/5/2013 to 18/5/2013.
  • Mr. S. Abilash attended FDP on Advances in IC Engines at St. Peter’s college of Engineering and Technology from 6/5/2013 to 18/5/2013.
  • Mr. M. Kamal attended FDP on Advances in IC Engines at St. Peter’s college of Engineering and Technology from 6/5/2013 to 18/5/2013.
  • Mr. A.P.Arun Pravin attended FDP on Advances in IC Engines at St. Peter’s college of Engineering and Technology from 6/5/2013 to 18/5/2013.
  • Mr. S. Rangarajan attended FDP on Advances in IC Engines at St. Peter’s college of Engineering and Technology from 6/5/2013 to 18/5/2013.
  • Mrs. K. Sunitha attended FDP on Advances in IC Engines at St. Peter’s college of Engineering and Technology from 6/5/2013 to 18/5/2013.
  • Mrs. A. Avadiammal attended FDP on Advances in IC Engines at St. Peter’s college of Engineering and Technology from 6/5/2013 to 18/5/2013.
  • Mrs. G. Ramya Devi, attended a two day workshop on Multiresponse Optimization at Saveetha Engineering college on 21.03.2013 to 22.03.2013
  • Mr. A. Shadrach Jeyasekaran attended workshop on Role of Polymers in Modern Engineering materials at Sai ram Institute of Technology on 12/4/2013.
  • A.Thamaraiselvan attended SAE Faculty Advisor Forum Meeting at SAE – Nissan Technologies on 3-12-2012.
  • A.Thamaraiselvan FDP on Entrepreneurship in Technology Business Incubator – St. Peter’s University on 3-12-2012.
  • A.Thamaraiselvan attended Conference on Estrablishment of EDC Cell in Higher Education at SPCET on 21.12.2012
  • D. Sathiyamoorthy attended FDP on IC engines at Anna University from 13-12-2012 to 17-12-2012.
  • Mr. A. Shadrach Jeyasekaran attended workshop on ISO Auditing Procedures and Documentation at SPCET on 19.06.2012
  • Mr. A.P.Arun Pravin attended workshop on ISO Auditing Procedures and Documentation at SPCET on 19.06.2012
  • Mrs. M. Jeyashree attended workshop on ISO Auditing Procedures and Documentation at SPCET on 19.06.2012

2011-12

  • Mr. A. Shadrach Jeyasekaran attended a National Level Workshop on Modern Techniques in Material Characterization and Material Testing on 05-03-2012 at S.A. Engineering College.
  • Mr. A. Thamaraiselvan attended a National Level Workshop on Modern Techniques in Material Characterization and Material Testing on 05-03-2012 at S.A. Engineering College.
  • S. Manoharan Presented paper Conference on Non-conventional Refrigeration aqnd Air Conditioning in Technology Business Incubator – St. Peter’s University on 15-03-2012.
  • Mr. A. Shadrach Jeyasekaran, attended Workshop on Popularization of research methodology and techniques on 18-11-2011 to 14-09-2011 conducted by St. Peter’s University.
  • Mr. A. Thamaraiselvan, attended Workshop on Popularization of research methodology and techniques on 18-11-2011 to 14-09-2011 conducted by St. Peter’s University.
  • Mr. A. Shadrach Jeyasekaran, attended FDP on Disaster Management on 11-09-2011 to 14-09-2011 conducted by St. Peter’s College of Engineering and Technology.
  • Mr. A. Thamaraiselvan attended FDP on Disaster Management on 11-09-2011 to 14-09-2011 conducted by St. Peter’s College of Engineering and Technology.
  • Mr. A. Shadrach Jeyasekaran attended FDP on soft Computing at Sri Sairam Institute of Technology on 15-09-2011 to 28-09-2011.
  • Mr. A. Thamaraiselvan attended FDP on soft Computing at Sri Sairam Institute of Technology on 15-09-2011 to 28-09-2011.

C) Faculty Achievements / Development

Patents

  • Dr. K. Purushothaman is one of the member who has applied for Patent “Patent no:201641021729” on the topic, “Design of intelligent vehicle control system using GIS GPS, Microcontrollers and Speed Governors” dated 24.06.2015.
  • Mr. A Shadrach Jeya Sekaran has applied for Patent “Patent no:20161012809” on the topic, “Woven Aloevera/Sisal/Kenaf fibre reinforced polymer composites for Corrugated Roof Sheet” and published on “The Patent Journal” dated 17-06-2016

Papers Published by Faculty Members

2015-16

JOURNALS

  • S Senthil Kumar, K. Purushothaman , “Performance Analysis of a Biodiesel Fuelled Diesel Engine with the effect of Alumina (AlO2) coated Piston”, International Journal of Thermal Science.(Accepted )
  • S Senthil Kumar, K. Purushothaman, “Review on Performance and Exhaust of EGR in CI Engines”, International Journal of Applied Engineering Research , Volume 10, Number 13, 2015
  • V. Ramakrishnan, R. Thamilarasan, K. Purushothaman, "Performance Evaluation of EGR in Two Stroke I.C. Engine", Applied Mechanics and Materials, Vol. 812, pp. 60-63, Nov. 2015.
  • Rajendran, S, Purushothaman, K, Design and analysis of inlet manifold of a four stroke petrol engine by increasing tumble flow rate and reducing air pollution using aerofoil plate., Academic Journal | Mechanika. 2015, Vol. 21 Issue 4, p307-312.
  • A. Shadrach Jeya Sekaran, “Evaluation on mechanical properties of woven aloevera and sisal fibre hybrid reinforced epoxy composites”, Bull. Mater. Sci., Vol. 38, No. 5, September 2015, pp. 1–11.
  • P. Suresh, “Product Development in an Automotive Component Using Design for Manufacturing and Assembly (DFMA) Concept”, International Journal of Applied Engineering Research, Vol.10, No.51, 2015. ISSN: 0973-4562.
  • P. Suresh, “Integration of DFE and DFMA for the sustainable development of an automotive Component”, International Journal of Sustainable Engineering, (Taylor &Francis), Vol. 9, No.2, pp 107-118.
  • N.K. Fracis, D. Sathiyamoorthy, Optimizing Abrasive Particle Speed and size on Machining Performance in SAFBM of Brass, International Journal of Applied Engineering and Research, Vol. 10 No. 17 (2015) pp 38543-38549.

CONFERENCES

  • K.Purushothaman,” Effect of Alumina coated piston on the performance of a Diesel Engine using Biodiesel”, National Conference on Contemporary Research in Advanced Material science – CRAMS 2016, Karpaga Vinayaga College of Engineering and Technology, 4th and 5th February 2016.
  • K.Purushothaman, “Performance Analysis of Compression Ignition Engine using Rubber Seed Oil Methyl Ester Blend with the Effect of Various Injection Pressures”, International Conference on Advances in Mechanical Engineering, ICAME 2015, University college of Engineering, Anna University, Villupuram, 15th and 16th October 2015.
  • A. Shadrach Jeya Sekaran, “Investigation on Tensile properties of woven aloevera/sisal/kenaf/fibre and its hybrid composites” ASME International Mechanical Engineering Congress & Exposition IMECE 2015, November 13-19 2015, Houston, Texas
  • G. Ramya Devi, Evaluation of thrust force and torque in drilling woven roving glass fibre reinforced plastic and aluminium sandwich laminate with TiAlN coated drill using Taguchi Analysis, International conference on frontiers in Automobile and Mechanical Engineering (FAME 2016), July 7th - 9th 2016.
  • G. Ramya Devi, “Effect of Machining Parameters on Thrust force in drilling Woven Glass Fibre Aluminium laminate with TiAlN coated drill”, ASME International Mechanical Engineering Congress & Exposition IMECE 2015, November 13-19 2015, Houston, Texas.
  • P. Suresh, “Product Development in an Automotive component using Design for Manufacturing and Assembly (DFMA) Concept”, International Conference on Advances in Materials and Mechanical Engineering 2015 (ICAESM 2015), 8th and 9th May 2015.
  • P. Suresh, “Cost Effectiveness and Sustainable analysis in an Automotive Component Vis-A-Vis Material and Manufacturing”, National Conference on Contemporary Research in Advanced Material science – CRAMS 2016, Karpaga Vinayaga College of Engineering and Technology, 4th and 5th February 2016.

2014-15

JOURNALS

  • S. Senthil Kumar , K. Purushothaman and P. K. Devan, Performance and Emission Characteristics of A Diesel Enginer using Rubber Seed Oil and its Diesel Blends. International Journal of Chemical Technology and Research, Vol. 8, Pp. 669-675, 2015.
  • S. Senthil Kumar K. Purushothaman, Evaluation of Statistical Study of Droplet Fragmentaton in CI Engine under lower Injection velocity, International Journal of Applied Engg Research, Vol. 10, No.3, pp. 7765-7776, 2015.
  • A. Shadrach Jeya Sekaran, “Some Natural Fibres used in Polymer Composites and their extraction Processes: A review”, Journal of Reinforced Plastics and Composites, Vol33(20), 1879-1892, Sep 2014.
  • A.Shadrach Jeya Sekaran, “Mechanical Characterisitics of Woven Banana and Glass Fiber Epoxy Composites”, Applied Mechanics and Materials, Vols 766-767 (2015) pp 110- 115.
  • P. Suresh, “An Integrated Approach for the sustainable development of an Automotive Component using CAD/CAE, DFE and DFMA Concept, Applied Mechanics and Materials Vol, 766-767, (2015), pp 1009-1014.
  • G. Ramya Devi, “Tensile Property Evaluation of Woven Glass Fiber Reinforced Plastic and Aluminium Stack” Applied Mechanics and Materials Vol, 766-767, (2015), pp 44-49.
  • M.V. Manivannan, “Complaint Mechanism design, Analysis and Application – A Review”, International Journal for Applied Engineering Research, Vol.10, no.4, 2015, pp 3667-3671.
  • M.V. Manivannan, “Automatic Sewage Cleaning Machine”, International Journal for Applied Engineering Research, Vol.64, no.1, ISSN no. 0973-4562.

CONFERENCES

  • R.Thamilarasan,V.Ramakrishnan,S.Sanjay, K.Purushothaman, ‘ Natural (Palm Leave) composite Material for Automotive applications –Review’- National Conference on Emerging Trends in Research and Advances in Mechanical Sciences (ERAMS-2015),Velammal Engineering College, 27th March 2015.
  • K. Purushothaman, “Design and Fabrication of Solar Pump”, National Conference on Recent Advances in Mechanical Science (NCRAMS’2K15), St. Peter’s University, (2015).
  • V.Ramakrishnan V, R.Thamilarasan, K. Purushothaman , ‘Performance Evaluation of EGR in Two Stroke I.C. Engine’ - National Conference on Evolution of Green Energy and Vehicle Technology(NCEGEVT2k15), Sri Venkateswara College of Engineering,Pennalur, Sriperumbudur(T.K)-602117, Tamilnadu. INDIA. 2nd & 3rd March 2015.
  • A. Shadrach Jeyasekaran, “Mechanical Characterisitics of Woven Banana and Glass Fiber Epoxy Composites”, ICAMME-14 International Conference on advanced mechanics and materials engineering, December 19-20, 2014
  • G. Ramya Devi, “Tensile Property Evaluation of Woven Glass Fiber Reinforced Plastic and Aluminium Stack”, ICAMME-14 International Conference on advanced mechanics and materials engineering, December 19-20, 2014
  • G. Ramya Devi “Multipurpose machine using Fly Press”, National Conference on Recent Advances in Mechanical Science (NCRAMS’2K15), St. Peter’s University, (2015).
  • P. Suresh, “An integrated approach for the sustainable development of an Automotive Component using CAD/CAE, DFE and DFMA Concept”, ICAMME-14 International Conference on advanced mechanics and materials engineering, December 19-20, 2014

2013-14

JOURNALS

  • K. Purushothaman, “Analysis of fuel flow in Internal Combustion J using CFD”, International Review of Mechanical Engineering Vol.8, N.3, May 2014.
  • K. Purushothaman, “Review on emission and characteristics of a diesel engine fueled with rubber seed oil based biodiesel”, IOSRD International Journal of Engineering, Vol.1Nov 2014, Pages 9-15.
  • K. Purushothaman, “A Review: Reducing Emissions for In-Cylinder Internal Combustion Engine”, International Journal of Applied Environmental Sciences, Vol.9, No.4 (2014) PP 1903-1921.
  • Muthuvel.S & Purushothaman K, “ A Performance analysis of Louvered Fin & Tube Heat Exchangers by Using CFD Techniques International Journal of Mechanical Engineering Research & Applications (IJMERA), Vol. 1 Issue 4, September – 2013.
  • P.Murugesan, “Multi Criteria Decision making approaches for green supplier evaluation and selection : a literature review”, Journal of Cleaner Production, pp.1-18
  • P.Murugesan, “An Analytic network process-based multicriteria decision making model for a reverse supply chain”, International journal of Advanced manufacturing Technology, Vol. 68, pp.863–880.
  • A.P. Arun Pravin, “Numerical Heat Transfer Analysis of High Speed Spindle Using Fluid Dynamics”, International Journal of Applied Engineering Research (ISSN: 0973-4562) (2014).

CONFERENCES

  • Ramakrishnan. V, Purushothaman. K, Emission control by selective Exhaust Gas Recirculation Scavenging system I Two Stroke Engine, International Conference on Innovative Design, Analysis and Automobile Engg, 22nd and 24th Feb 2014.
  • A.P. Arun Pravin, Numerical Heat Transfer Analysis of High Speed Spindle Using Fluid Dynamics, National Conference on Emerging Trends in Thermal, Industrial and Manufacturing Engineering, e-TIME 2014.
  • A. Avadi Ammal, Conversion of destructive Acoustic Energy into useful Energy for Aircraft Internal Lighting System, International Conference on Green Technologies for Power Generation & communication, April 3rd & 4th 2014.
  • M.V. Manivannan, Investigation of tensile strength of polymeric syntactic foam, Emerging Trends in Design, thermal and Manufacturing

2012-13

JOURNALS

  • S. Rajendran, Purushothaman.K, Performance Evaluation of EGR in Two Stroke I.C Engine, International Journal of Engineering Research and Technology (IJERT). Vol. 1, Issue 3, May 2013.
  • G. Gopalaramasubramaniyan; V.S. Senthil Kumar; R. Karthikeyan, Optimisation of process parameters using meta-heuristics algorithms for the manufacturing of leaf spring assembly, Int. J. of Operational Research, 2012 Vol.15,No.1,pp.16-29
  • G. Gopalaramasubramaniyan, V.S. Senthil Kumar (2012), “Multi response optimization of the hole punching process parameters in the leaf spring assembly using the grey taguchi method and simulated annealing algorithm”, Applied Mechanics and Materials, Vol.: 110 – 116, p. 1691 – 1695. Trans Tech Publications. Impact Factor/2011: 0.05.

CONFERENCES

  • S. Senthil Kumar, K. Purushothaman, Emission and Performance characteristics of a diesel engine fueled with Rubber seed oil Based Bio diesel, International Conference of Engg and Technology, 2013.
  • P. Suresh, Achieved Best Paper Award titled on “Integration of Sustainability and DFMA for the development of product” in the IEEE International Conference on Research and Development on Engineering and Technology (IEEE-ICRDPET-2013), March 29-30,2013,E.G.S Pillay Engineering College, Nagapattinam, Tamilnadu, India.
  • K.Manigandan and S. Jebamani,” Aerodynamic Design And Analysis Of A Car Body” National conference on Mechanical Sciences(MS-13),St.Peter’s University,14th & 15th March 2013.
  • M.Anand and S. Jebamani,” Design And Structural Analysis Of Broaching Tool” National conference on Mechanical Sciences(MS-13),St.Peter’s University,14th & 15th March 2013.
  • R.Selvam and S. Jebamani and A. Sengolerayan,” Cfd Analysis Of Wave Energy Heavemotion In Axisymmetric Cylinder Heave” National conference on Mechanical Sciences(MS-13),St.Peter’s University,14th & 15th March 2013.
  • R.S. Senthil Kumar and S.Jebamani,” Design And Analysis Of Fatigue Stress In Crank Shaft” National conference on Mechanical Sciences(MS-13),St.Peter’s University,14th & 15th March 2013.
  • M.Avadi Ammal, “Computer Aided Design Of Flywheel And Four Bar Mechanisms” National conference on Mechanical Sciences(MS-13),St.Peter’s University,14th & 15th March 2013.
  • R. Nishanth Attended “MAGNUM OPUS TWENTY 13” National level conference in SATYAM COLLEGE OF ENGINEERING and Presented paper titled, Comparision Of Manual Shielded Metal Arc Welding With Mechanized Gas Shielded Arc Welding In P91 Material For Boiler Application.
  • S. Rangarajan, Analysis and characterization of scaffolds fabricated using 3 d printing, Recend Trends in Manufacturing Technology, March 2013.
  • Meikandan M, Presented Paper entitled “Fabrication of Quantum Dots Embedded Nano Fibrous Membrane for Gas Sensor Applications” in the International Conference “ICNFA-2013” conducted by Coimbatore Institute of Technology - Coimbatore, India.
  • Meikandan M, Presented paper entitled “Cam Operated Multi Operation Machining System” in the National Conference “NCMM-2012” conducted by VelTech Dr. RR & Dr.SR technical university, Chennai.

2011-12

JOURNALS

  • S. Senthil Kumar., K. Purushothaman, High FFA Rubber seed oil as an alternative fuel for diesel engine – An overview, International Journal of Engg and Science (Research and Invention), Vol. 1, Issue 10, Dec 2012.
  • G.Gopalaramasubramaniyan, “Parameter Optimization of the Sheet Metal Shearing Process in the Manufacturing of Leaf Spring Assembly Using the Grey Taguchi Method and Simulated Annealing Algorithm”, Advanced Materials Research,Vol.314-316 (2011), pp 2458-2463.
  • G.Gopalaramasubramaniyan, “A framework of integrated process planning with optimized process parameters for leaf spring manufacturing”, Transactions of ASME, ASME Digital Library, DOI: 10.1115/1.859810, Paper 155.
  • P.Murugesan, “Analysis of third party reverse logistics providers using interpretive structural model”, International Journal of Production Economics, Vol. 140(2012), pp.204-211.
  • S. Abilash “Fatigue Crack Growth Arrestor for High Speed Flexible Coupling of Fighter Aircraft Transmission Systems” was published in “International Journal of Vehicle Structures & Systems”.
  • S. Abilash “Estimation of Coating Thickness for Higher Load bearing Capacity under Adhesive Contact of Rough Surfaces with Soft Coating site materials” was published in “International Journal of Composite Materials and Manufacturing”.
  • S. Abilash “Cooperative manipulators handling an object: Adaptive control in joint space” was published in “International Journal of Advanced Mechatronics and Robotics” (Scopus and Elsevier's bibliographic database).
  • S. Abilash “Collaborative manipulators handling flexible object in joint space modeling, control and analysis” was published in “International journal of mechanical Production Engineering Research and Development” (JCC Impact Factor: 3.14).
  • Arun Pravin. A.P, “Prediction and minimization of temperature Rise in High Speed Spindle with Axial Flow Cooling System”, European Journal of ‘Scientific Research, ISSN 1450-216X, Vol.77 No.2 (2012) pp 205-213

CONFERENCES

  • K. Purushothaman “Experimental and CFD analysis of small Engine Carburretor Venturi”, National Conference NCIME 11.
  • Muthuvel. G, K. Purushothaman, “Performance Evaluation of an Alternate Metal form for Lowered Fin Heat Exchangers”, National Conference in Research Trends in Mechanical Engg., 11 April 2012.
  • K. Purushothaman, “Study of Combustion, Performance and Emission Characteristics of Compression Ignition Engine operating on a Diesel-Orange oil blended with Lower Concentrations”, International Conference on Mechanical, Automobile and Robotics Engineering (ICMAR 2011), Planetary Scientific Research Centre, Thailand
  • Suresh. P, Ramabalan, S., Natarajan, U. “An Approach to improve the sustainability of Product” In: Abstract of Proceedings of the International conference on Recent Advances in Mechanical Engineering (INCRAME 2012), April 19- 20, 2012, Dr.M.G.R Educational and Research Institute University, Adayalampattu, Chennai-600095, Tamilnadu, India, p.50.
  • S. Abilash “Fatigue Crack Growth Arrestor for High Speed Flexible Coupling of Fighter Aircraft Transmission Systems” had been presented for ICDAAME-2011.
  • S. Abilash “Optimizing Coating Thickness for Higher Load bearing Capacity under Adhesive Contact of Rough Surfaces with Soft Coating” had been presented for INCRAME 2011.
  • S. Abilash “Robust adaptive control for two robot manipulators handling an object” had been presented for ICMRM-2011.
  • S. Abilash “Effect of surface roughness parameter on the load bearing capacity under adhesive contact under rough surfaces with soft coating” had been presented for ICMEET 2011.
  • D.Sathiyamoorthy and V. Sritharan “Prediction of Surface Roughness and Delamination in End Milling of GFRP Composite”, in a National level Technical Conference on Recent Research in Mechanical Engineering (RRME’11) at “Adhiparasakthi Engineering College”, Melmaruvathur.
  • Arun Pravin. A.P, “Prediction and minimization of temperature Rise in High Speed Spindle with Axial Flow Cooling System” International Conference on Emerging trends in Mechanical Engineering, GCT,
  • Meikandan M, Presented Paper entitled “Novel material for real time waste heat recovery in the automobile muffler” in the International Conference “ICST 2011” conducted by VelTech Dr. RR & Dr.SR technical university, Chennai.

STUDENT ACHIEVEMENTS

2015 – 2016

  • L.Dinesh of IV year Mechanical participated and won first place in paper presentation, held at SPCET, Mechanical Symposium KRNOVOATE ’15 held on 23/09/2015.
  • D.Hariprasad of IV year Mechanical participated and won first place in paper presentation, held at SPCET, Mechanical Symposium KRNOVOATE ’15 held on 23/09/2015.
  • Dillpanandhan of IV year Mechanical participated and won second place in paper presentation, held at SPCET, Mechanical Symposium KRNOVOATE ’15 held on 23/09/2015.
  • Samuel Rajkumar & Sam Austin of II year Mechanical participated and won third place in paper presentation, held at SPCET, Mechanical Symposium KRNOVOATE ’15 held on 23/09/2015.
  • S. Anandraj of IV year Mechanical participated and won first place in Mechanist event, held at SPCET, Mechanical Symposium KRNOVOATE ’15 held on 23/09/2015.
  • P.Vijayakumar of III year Mechanical participated and won second place in Mechanist event, held at SPCET, Mechanical Symposium KRNOVOATE ’15 held on 23/09/2015.
  • P.Madhan of IV year Mechanical participated and won third place in Mechanist event, held at SPCET, Mechanical Symposium KRNOVOATE ’15 held on 23/09/2015.
  • P. Madhan, T.Gopinath & L.dinesh of IV year Mechanical participated and won first place in RC CAR event, held at SPCET, Mechanical Symposium KRNOVOATE ’15 held on 23/09/2015.
  • P. Nirmal, Mohammed Usman of IV year Mechanical participated and won first place in Design Contest event, held at SPCET, Mechanical Symposium KRNOVOATE ’15 held on 23/09/2015.

2014 – 2015

  • R.Saravanan, S.Rajesh & V.Balaji of IV year Mechanical participated and won first place in solid modelling event, held at SPCET, Mechanical Symposium YANTAR ’14 held on 23/09/2014.
  • Jai Kangamuthu.V.M, Nirmal Kuamr.M & Maruthnayagam.S of IV year Mechanical participated and won first place in RC CAR event, held at SPCET, Mechanical Symposium YANTAR ’14 held on 23/09/2014.
  • S.V.Arun Kumar of IV year Mechanical participated and won third place in Mechanist event, held at SPCET, Mechanical Symposium YANTAR ’14 held on 23/09/2014.
  • A.P.Prasanth, P.Sai Avinash of IV year Mechanical participated and won third place in Technical Quiz event, held at SPCET, Mechanical Symposium YANTAR ’14 held on 23/09/2014.
  • M.Venkatasan of III year Mechanical participated and won third place in paper presentation event, held at SRR Engineering College held on 27/09/2014.
  • M.Venkatasan Venkatasan of III year Mechanical participated and won first place in Online Photography event, held at TJS Engineering College held on 26/09/2014.
  • M.Venkatasan Venkatasan of III year Mechanical participated and won second place in MAD four CAD event, held at held at TJS Engineering College held on 26/09/2014.
  • G.Ezhilarasn of IV year Mechanical participated in Dismantling and assembly and engine workshop held at MIT Chennai 13-14/02/2015.
  • L. Suhal Ahamed of III year Mechanical participated in Dismantling and assembly and engine workshop held at MIT Chennai 13-14/02/2015.
  • S. Suthir Kumar of IV year Mechanical participated in Auto Anatomy workshop held at CEG Chennai held on15/03/2015.
  • S. Suthir Kumar IV year Mechanical participated in Advanced machining process workshop held at MIT Chennai 8-9/03/2015.
  • Kathick P IV year Mechanical participated in Advanced machining process workshop held at MIT Chennai 8-9/03/2015.

2013 – 2014

  • Karthick. R secured 22nd Rank in Anna University Ranks.
  • Aswin .M secured 34th Rank in Anna University Ranks.
  • Veeraragavaraj of III year Mechanical participated and won First place in paper presentation event, held at SRR Engineering College held on 01/10/2013.
  • The following students of IV Mechanical have participated in CATIA V6 – Training held at SPEC –TBI held on 25/09/2013
  •               * V.Madhavan
                  * K.Karthikeyan
                  * M.Ajay Rajan
                  * T.S. Ashok Kumar
                  * S.Arun Kumar
                  * V. Nagaraj
                  * V. Nagaraj

2012 – 2013

  • Mohan Kumar secured 40th Rank in Anna University Ranks.
  • K.K.Dinesh of IV year Mechanical participated and won Third place in paper presentation, held at SPCET, Mechanical Symposium MECARDIA ’12 held on 25/09/2012.
  • R Santhosh Kumar & S Vignesh Rao of IV year Mechanical participated and won First place in paper presentation, held at Jeppiaar Engineering College held on 14/03/2013.
  • K K Dinesh of IV year Mechanical participated in Global Entrepreneurship workshop held at GKM CET held 4-5/03/2013.
  • Karthikeyan K of III year Mechanical participated and won First place in Techhunt event, held at Jain Engineering College held on 2/2/2013.
  • Sumdaram, Prabu TM, N Ganesh of III year Mechanical participated in Idea to execution for entrepreneurs at Saveetha Engineering. College, Chennai on 10/8/2012.

2011 – 2012

  • Thamizhvanan.P secured 24th Rank in Anna University Ranks.
  • Aravindan G of III year Mechanical participated and won First place in paper Bot War event, held at Pondichery Engineering College held 18-19/08/2011.
  • Nirmal Raj of III year Mechanical participated and won first place in paper presentation event, held at Ramanujar Engineering College held on 9/9/2011.
  • Vinayagamoorthy of III year Mechanical participated and won First place in Cad Modeling event, held at Ramanujar Engineering College held on 9/9/2011.
  • Nirmal Raj of III year Mechanical participated and won second place in Cad Modeling event, held at Ramanujar Engineering College held on 9/9/2011.
  • The following students of IV Mechanical have participated in Engine Workshop held at CEG, Chennai held 2-3/03/2012.
  •               * KK Dinesh
                  * Jothi Ram Prasath
                  * Mathews B
                  * Vasath Kumar B
  • Karthick V of III year Mechanical participated in Kurukshetra at CEG, Chennai held 1-4/02/2012.
  • KH Aravindh, J Aravinth, Prabakaran of II year Mechanical participated in Trends in mechanical engineerning at CEG, Chennai held 27-29/03/2012.